SIEMENS SMT PARTS You can find almost all ASM/SIEMENS SMT accessories at RMSHT, original brand new or used, your reliable SMT supplier INQUIRE NOW >>> OTHERS SIEMENS SPARE PARTS LIST 00116816-02 Moveable magazine of size II PS/PC with secure lock. Witdh adjustment from 50 to 259mm. The maximum PCB length is 399mm and the magazines has a storage capacity of up to 50 pieces with a 10mm spacing. Magazine dimensions are 320 x 400 x 567mm (w x l x h). Material is Polystyrol (magazine plate) and Polycarbonat (side parts), till 55 degree celsius, time in oven max. 15 min. PCB temperature up to 80 degrees celsius. 00343635-01 DISTRIBUTOR PCB-BARCODE 00116908-01 Upgrade Setup Center Package (V3.0) 00343651-01 PROXIMITY SWITCH SME-8-K-LED-24 00116933S03 ESS Docking Unit for COTF-X (HW) 00343676-01 GLASS SHEET WITH FRAME 00116935-01 SIPLACE Splice Detection Hub for Table Controller: This item is needed to prepare a SIPLACE station for splice detection. It contains a hub for connection of up to 2 table controllers for SIPLACE S/F. Also, cabling and mounting material is included. Additionally, the respective table controller(s) and splice sensors need to be ordered. 00343678-01 DOUBLE-FACED ADHESIVE FILM 00116936-01 SIPLACE Splice Detection Hub for Table Controller: This item is needed to prepare a SIPLACE station for splice detection. It contains a hub for connection of up to 4 table controllers for SIPLACE HS-xx. Also, cabling and mounting material is included. Additionally, the respective table controller(s) and splice sensors need to be ordered. 00343699-01 COVER for 80S15 / S20 00116961-01 Protection Shield for SIPLACE Placement Stations 1 feeder location. 00343700-01 Cover for 80F3 / F4 12K / F4 6K 00116962-01 Protection Shield for SIPLACE Placement stations 6-10 feeder locations. 00343704-02 Glass comp.f.FC camera stat. and RV-head 00116963-01 Protection Shield SIPLACE Placement stations 11-20 feeder locations. 00343705-01 S20 COMP.CHANGE-OVER TABLE CABLE CHANNEL 00117010S03 Dip module f. fluxes and adhesive 00343710-03 Fine calibration for SIPLACE F5 HM, S-27 HM, HS, HF with 505.04 (don't work with MTC) for minimization of the placement offset (shift). The option comprises 1 glass board, 48 glass components, 1 roll of ceram pads (item number 359505) and a measuring and evaluation software. Pick and Place Head and Collect and Place Head with flip-chip-camera, respectively DCA-camera requires item no. 343704 (glass components for P &P-camera sationary and C&P Head). Preconditions: Waffle-Pack-Magazine mounting (item number 116430), SW 406 or higher respectively SW 502 or higher. 00117120-01 Measurement device for inspection of the coplanarity on the leads of IC. For use with Pick and Place Head for SIPLACE F5HM. 00343720-01 BELLOW CYLINDER Serie 1916-09 00117130-06 DCA-Camera SIPLACE includes the following materials: one DCA vision module including cover, (Exchange between standard Collect and Place Head vision module). The DCA vision module covers a component range from 0.5mm x 0.5mm up to 13mm x 13mm. The maximum field of view is 15.7mm x 15.7mm. The minimum bump diameter is 110µm (4 mil),the minimum pitch 200µm (8 mil). 00343769-02 S50 COMP.TABLE BELT CONTAINER 00117185-01 Retrofitting kit to 110/208V operating voltage for SIPLACE S/F. Delivery as a part of station free of charge. Attention: If retrofitted at a costumer a voltage savety check (DIN EN 60204)is necessary. For assistance please ask SIPLACE SMT Service. 00343785-01 TRACK TESTING UNIT HS50 00117228-01 Component feeder changeover table, height 830-950mm, with integrated reel container. For SIPLACE F5 HM first equipment, right placement station side. For SIPLACE S-27 HM first equipment, left and right placement station side. Lifting device and wheels for short setup times. Component feeder capacity 20 slots for 59 8mm tapes, when using 3x8mm feeder. Versions 230V/110V. For additional changeover tables please order item no.: 116226. In order to avoid head crash, caused by non correctly fixed component feeders, it is recommended to use the item no.:116225 (Feeder fastening attachement). 00343788-02 COMP.MAGAZINE LONG W6,9H1,5LE7 00117230-01 Component feeder changeover table, height 830-950mm, with integrated reel container. For SIPLACE F5 HM placement station with Productivity Lift. Integrated lifting device and wheels for short setup times. Feeder capacity: 20 Slots. Versions 230V/110V. In order to avoid head crash, caused by non correctly fixed component feeders, it is recommended to use the item no.:116225 (Feeder fastening attachement). 00343790-02 COMP.MAGAZINE LONG W7,7/H3,8/LE10 00117260-03 The Head Re-Configuration Kit is necessary to exchange the Collect and Place Head of SIPLACE placement stations with Head Modularity, SIPLACE F5 HM (117500), in a 12-Segment Collect and Place Head. The Kit includes: 12-Segment Collect and Place Head, Set Nozzles, Set Sleeves, Cover, Tools for Head exchange, Box for replaced Head, Technical Manual. With this kit the Head exchange can be performed by trained service personnel at customer side within 8 hours. If required the automatic nozzle changer for the 12-Segment Collect and Place Head has to be ordered separately. 00343792-01 MAGAZINE LONG B4,5 H4,5 LE5 00117261-03 The Head Re-Configuration Kit is necessary to exchange the Collect and Place Head of SIPLACE placement station with Head Modularity, SIPLACE F5 HM (117500), in a 6-Segment Collect and Place Head. The Kit includes: 6-Segment Collect and Place Head, Set Nozzles, Set Sleeves, Cover, Tools for Head exchange, Box for replaced Head, Technical Manuel. With this kit the Head exchange can be performed by trained service personnel at customer side within 8 hours. If required the automatic nozzle changer for the 6-Segment Collect and Place Head has to be ordered separately. 00343794-01 MAGAZINE LONG B28,8/H10/LE60 00117520-01 By use of the option Nozzle Splitting the nozzle magazines of a 12-Segment Collect and Place Head can be equipped with different nozzle types. The nozzles are assigned to the magazines via the user interface of the station computer. Station computer software 407.04 is mandatory for this option. The option includes: installation-CD with software description, licence for one placement machine. 00343796-01 MAGAZINE LONG W9,2/H6,5/L7 00118012-01 Package for placement of 0201 components (size 0.6 x 0.3mm). Suitable for all SIPLACE F5 HM, S-27 HM, HS-xx, HF-Series and Compact. The Package includes: 12 x Nozzle type 902, 0201 Handbook. In addition the special 3 x 8mm 0201 feeder module is necessary for any 0201 placement (item number: 141099). System requirement: Station computer >= 405.01 .Line computer >= 501.01. 00343798-02 COMP.MAGAZINE LONG W7,4H1,8LE12 00118021S01 The component sensor as additional optical sensor module verifies the presence / absences of a small component short just before placement / pickup respectively. Suitable for all SIPLACE S-27 HM, HF-Series and HS-xx in combination with the 12-Segment Collect and Place Head. One Package per Head is required. The component sensor requires the modular head board. This might have to be retrofitted at SIPLACE S-23 HM item no. 359488 (and in field upgraded SIPLACE S-25 HM) and SIPLACE HS-50 item no. 359489. When using the nozzle type 906 for 0201 placement the sensor is mandatory. System requirement: Station computer >= 503.01 .Line computer >= 503.01 or SIPLACE PRO 1.3. 00343800-01 COMP.MAGAZINE f.TSOP - 40 00118092-01 SMEMA Interface SIPLACE S-25 HM. 00343802-02 ETP PNEUMATIC CUTTING DEVICE f.SIPL 80F4 00118100-01 Mechanical Head Crash Protection for SIPLACE S-20, S-23 HM, S-25 HM and S-27 HM to avoid a head crash with feeders and/or feeder flaps. Restriction 6-Segment Collect and Place Head with nozzels type 820/821/921. 00343821S01 CENTERING STATION F.CERAMIC NOZZLE G4.3 00118101-01 Adapter device SIPLACE S/F at changeover table with wheels, for reel holder (item no:141204) of 3x8mm feeders (item no:141098,141099). 00343822-01 JAW,"H"for CERAMIC/VECTRA NOZZLES 00118261-03 Nozzle changer for 12-Segment Collect and Place Head of the SIPLACE S-27 HM. Two nozzle changers are needed, one per head. Stationssoftware higher than 502.xx, Linesoftware higher than 502.xx. Option contains 8 magazines for 12 nozzles. 00343823-01 JAW,"Z"for CERAMIC/VECTRA NOZZLES 00118262-01 Nozzle changer for 6-Segment Collect and Place Head of the SIPLACE S-27 HM. Stationssoftware higher than 502.xx; Linesoftware higher than 502.xx. Option contains: 2 magazines for big nozzles and 3 magazines for little nozzles. 00343828S03 FEEDING TRACK (IN FRONT) 00118271S01 This item is required one time per changeover table. One SIPLACE S/F can be equipped with 2 table controllers (option MTC does not fit!). The following items are included: Splice Detection Table Controller (1 pcs). 00343831S03 FOIL INSERT GUIDE 00118272-01 This item is required one time per SIPLACE S-25 HM and S-27 HM per table with MTC. The following items are included: Splice Detection Table Controller (1 pcs). 00343842-01 S20 COMP.TABLE ROLL 00118300-01 With the Option Retrofit Vacuumpump SIPLACE S-25 HM a SIPLACE S-25 HM can be connected to an external Vacuumpump. This reduces the air consumption to 200 NI/min. To guarantee the specification of SIPLACE S-25 HM the vacuumpump must fulfil the specification of Siemens. More details from the respective Sales or Service representative 00343908-02 BACKPLANE SERVO S23 (CURRENT PRE-REGUL.) 00118405-01 Long Board Option for SIPLACE S-27 HM: with this Option we can handle pcb's up to 610mm x 460mm (24 inch x 18 inch ) in the single conveyor mode. This option can be used for single and dual conveyor systems. 00343912-01 Servicebox SIPLACE HS-xx. Provided free of charge with initial system installation. Indicated price valid for additional orders. 00118506-01 With the Option Retrofit Vacuumpump SIPLACE S-27 HM a SIPLACE S-27 HM can be connected to an external Vacuumpump. This reduces the airconsumption to 200 NI/min. To guarantee the specification of SIPLACE S-27 HM the vacuumpump must fulfil the specification of Siemens. More details from the respective Sales or Service representative. 00343985-01 Synchron- disk 00118525-01 Additional mechanical PCB alignment for S-27 HM dual conveyor: with this option PCBs with a length/width ratio >2/1 can be transported with the small side at the dual conveyor belts into the placement area. This option is only available for dual conveyor. 00343996S04 DRIVE COMPLETE ABOUT PAYMENT AND SHIPMENT ABOUT SHIPMENT We have a variety of express delivery options for your goods, such as DHL, UPS and FedEx Express. We deliver using the quickest and cheapest way, or with the best transportation resources according to the cargo weight, volume and so on.You can relax, we will do our best to deliver your packages quickly and safely, no matter by which mode of transportation. ABOUT PAYMENT About payment, we accept multiple payment methods, such as T/T, Paypal, Western Union, Alipay and WeChat. Any kind of payment is official. Once your order is confirmed, we will send a photo to you as a reference before shipping. ABOUT PACKING Your goods are handled with great care from the time of purchase to delivery. After going through QA inspection, we use foam cotton and pearl cotton to wrap each piece of product so that it arrives at your hand in perfect condition. The vacuum bags & wooden boxes we use for packing our equipment are carefully selected to ensure no rust occurs during shipment by sea, which can cause serious damage to your equipment. RHSMT CERTIFICATE FAQ Why choose US? Since its inception, our company has specialized in the SMT industry. With ten years’ experience, we are experts at providing a high quality service to our customers. We will do everything we can to ensure that you are happy with the work that we have done for you. What are the main products you sell? One-stop SMT solution. All SMT machine brands are available, including Panasonic, FUJI,JUKI, YAMAHA, SAMSUNG, DEK, MPM, HITACHI, UNIVERSAL, Assembleon , SONYO, SONY ect. Besides, screen printer, SPI, AOI, is available too. Are there any other services? We also offer repair and nozzle customization services. Repair mainly includes: Driver, Motor, Board, Laser, PPU, TC, PHS, etc. Nozzle customization service: you only need to provide drawings of electronic components, or provide samples, we can design and make the nozzles What are the specific product categories Mainly including: Feeder, Nozzle, Motor, Filter, Driver ,Valve, Nozzle holder , Placement head, Squeegee, Clamp, Cylinder , Ejector, Laser, Jig... Why should we trust you? We have been engaged in the SMT industry for more than ten years and have accumulated a lot of praise from customers, and we are also an active member of IPC What is your advantage ? High cost performance: We work closely with Chinese agents and can get very favorable prices, so the price to customers is very good. Timeliness: Active and quick response is the biggest highlight of our service Professionalism: We not only sell products, but also provide customers with technical services. We support online solutions for any technical problems! What is the guarantee of the quality of your products? Some of our products come in three states: Original new, Original used, Copy new.When we quote to the customer, it will be in a standard state. The state of the goods in your hand is the same as the description on the quote or PI, and we will never deceive the customer! What kind of SMT equipment and spare parts do you supply? One-stop SMT solution, all kinds of equipment and spare parts are available as well as technical support and repair service. How to guarantee the quality? Professional QC double check before shipment, test on machine if necessary and material with warranty. How to solve quality problem? In the warranty period, non-human reasons and operating errors of quality problems, free technical support and part replacement is available, even refund. What’s the delivery time? SMT/AI spare parts lead time: 2-3 days. If order from origin factory , the lead time need 4-8 weeks. SMT machine equipments lead time: 1-2 weeks SMT peripheral equipment lead time: 2-4 weeks How long is the warranty period? The warranty period of SMT Spare parts is: 3-6 months The warranty period of SMT peripheral equipment is 6 months How to deal with after-sales? We accept exchanges, returns. If there is a problem with the machine, we usually replace the parts for you We do not know how to clear customs, and how to buy? We cooperate with professional freight forwarding companies and can help you with customs clearance. What’s the payment term? TT, Paypal, Western Union, LC , 100% before shipment. Where is your main market? Asia, Europe, USA and Brazil. Are you a factory or manufacturer? OEM&ODM service are available. What’s the packing? Spare parts -- Carton+ bubble cotton; Equipment -- Wooden case + vacuum sealed. What are the trade terms? EXW, FOB, CIF, CFR, DAP ect. What is the Shipping methods By air, by sea, by train, carrier account ect. How to ship without the carrier account? Professional forwarder will handle shipment.